Manufacturer of Linear Modules,Linear Motors,Electric Cylinders,Truss System!
Facebook
LinkedIn
TikTok
YouTube
E-Mail
Linear Modules,Linear Motors,Electric Cylinders
Menu
MENU
MENU
Home
About Us
Linear Motion
Linear Modules
Belt Linear Module
Screw Linear Module
Multi Axis Linear Module
Helical Rack Pinion Linear Module
IP65 Bellows Cover Linear Module
Linear Motor Systems
Guide Rail Linear Motor Module
Linear Motor with Embed Guide Rail
Ironcore Flat Linear Motor
U Shape Ironless Linear Motor
Shaft Linear Motor
Linear Motor Drive
Linear Motor Feedback System
Electric Cylinders
Industrial Servo Electric Cylinder
Truss & Robot Track Systems
Truss Manipulator
Lathe Gantry Loader
Robot Ground Rail
Overhead Robot Track
News
Technical Guide
DownLoad
Contact Us
Construction of Rack and Pinion Steering System
Home
Construction of Rack and Pinion Steering System
How to Install and Splice a 6-meter Rack and Pinion Linear Module
September 12, 2026
Technical Guide
How a long Rack and Pinion Linear Module axis is sectioned, joined, verified — and what changes when it is rebuilt on site Author: DeMing, Engineering Director | Published:12th,Sept 2026| Category: Technical Guide A rack and pinion axis is the only common linear drive with no inherent length limit. A ball screw runs into critical speed, a belt runs into stretch and resonance, but a rack is short and rigid no matter how many sections are laid end to end. That is why rack and pinion is the default once travel passes a few metres. The length comes with one condition attached: every metre of travel beyond a single machined section has to cross a joint. Everything that decides whether a 6 m or 20 m axis performs like a continuous one happens at those joints — in how the sections are drawn, how they are machined, how they are brought together, and how the result is verified. This guide sets out that process end to end. It is written for the engineer specifying or receiving a long axis, so it covers what is done in our factory and what changes when the axis is broken down for sh ...
Read more